General Dynamics LT-3600 User Manual download pdf (Page 8)

Integrated L-Band Up/Dn Converter LT3600 CG-1309

Page 8

1.8 Part Number Configuration

The Part Number Selection Chart shows configuration options that are set at the factory prior to

shipment. The voltage output to J4 and J10 may be changed as required by the customer, however

this requires removal of the cover and resetting internal jumper connections. This should be

performed by qualified personnel.

Digit 2

Digit 3

Digit 4

Digit Base

Number

IF Operation L-Band Bias Voltage Ref. Oscillator

201667 - 1 70 MHZ 1 Std. 0 None 0 Std 10Mhz

2 140 MHz 2 Extend 1 D/C-22VDC

U/C-22VDC

1 Hi Accuracy

10 MHz

2 D/C-22VDC

U/C-15VDC

Digit 6

Digit 7

Digit

L-Band Ports 10 MHZ Ref. Out StarSwitch Ready

0 SMA Female 0 No Output 0 No

1 N-Type Female 1 U/C & D/C 1 Yes

2 U/C Only

3 D/C Only

Note: If connected to a StarSwitch, No Bias Voltage Output is allowed.

Option Descriptions:

Digit – IF Frequency, Options 3 and 4 are set for inverted spectrum.

Digit – Standard – 950 to 1525 MHz, Extended – 950 to 1950 MHz

Digit – Bias voltage outputs are switchable in rear panel, if selected.

Digit – A reference oscilator is built in to the main board. The high accuracy unit is optional.

Digit – D/C Input and U/C Output Port Type (J4 & J10)

Digit – The output from the 10 MHz reference oscilator may be connected to either or both.

Digit – StarSwitch Ready includes output connections to J5 and J8 for control between the

Starswitch and the LT3600.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

No comments

General Dynamics LT-3600 User Manual Page 8